ManyCam
You can stream from your phone to multiple channels through StreamVi and the ManyCam app. The app may look different from these screenshots; see the broadcast setup guide for the current Cabinet.
Install and open the app. Allow camera and microphone access for video and sound, and photo and video library access if you add that media to your broadcast.
The official ManyCam Mobile description lists up to two video sources in the free app; paid ManyCam subscriptions unlock additional features. These are ManyCam's separate terms, not benefits included in a StreamVi plan. When adding a source, choose the required content from the app's list.
The camera change button is located under the number 1. If you click on the menu (number 2), the settings will appear. Here you can choose a sticker, a color, and turn the microphone on and off. Button 3 adds another window to your scene, where there is also a choice. Press 4 to turn on/off the flash. The application settings can be accessed by swiping from top to bottom or by pressing the 5 button.
To start broadcasting through our platform, you must:
- On the main screen of the ManyCam application, click on the broadcast button. A list of channels will appear. Click Add RTMP Server to get the settings for adding our service.
- Open StreamVi on your phone, select the correct project, and configure your channels and enable the required channel switch.
- In StreamVi, open Home → RTMP and Key.
Copy the selected RTMP server address into ManyCam’s URL field.
- Copy the key from the same project into ManyCam’s key field. The screenshot masks the key; use your own.
- Enter a recognizable connection name in ManyCam and tap Start stream.
The stream will start in the channels you have selected. During the stream, you can change the scenes and camera, or apply color and insert stickers, as described above.
Attention multichat cannot be inserted in this application!
To end the stream, press the broadcast button again. Check that it has ended in StreamVi and on the destinations; with disconnect protection enabled, StreamVi may still be waiting for the source.